The MERV 15 Filtration Physics - Short #300

0:00-20:33

In this short podcast episode, Bryan and Roman Baugh talk about indoor air quality and microbial control, specifically MERV 15 filter physics and how it all works when bringing in outdoor air. We filter indoor air to keep dust and particles off the equipment and keep them from circulating through the air. However, we also need to filter fresh air. While indoor air has several pollutants, including dust and VOCs, that make outdoor air dilution a sensible solution, outdoor air also has spores and other pollutants we want to filter out, and its quality can be hard to evaluate. Roman had an ERV that fed his VRF system, and it had significant microbial growth inside; he had some MERV 6 filtration on it, but that didn't capture particles effectively enough. MERV ratings measure the ability to filter particles out, and we use a unit called microns to measure particle size; higher ratings indicate a greater filter surface area and a better ability to filter out smaller particles. ASHRAE 52.2 divides particles into three categories: E1 (ultra-fine particles between 0.3 and 1 micron in diameter), E2 (fine particles between 1 and 3 microns), and E3 (coarse particles between 3 and 10 microns in diameter). MERV 15 filters have a 90% capture rate of E2 particles and a 90%+ capture rate of E3 particles.

Publisher

HVAC School - For Techs, By Techs

Link

hvacschool.libsyn.com/the-merv-15-filtration-physics-short-300

Published

August 25, 2026

Duration

21 min

Format

Podcast

Category

Issues · Careers

Source

RSS feed

Host

Bryan Orr

HS

HVAC School - For Techs, By Techs

@hvacschoolfortechsbytechs

#merv #filtrationphysics #short #careers #selfimprovement

The Nile