Vision Jet SF50 Landing Gear Collapse: Wrong Lever After Touchdown +GA News
Episode 411
Max talks with Rob Mark about a classic "simple mistake with big consequences" scenario: a pilot who possibly raised the landing gear handle instead of selecting flaps up during the landing roll in a Cirrus Vision Jet. The event looks minor on the surface—no injuries and the airplane stayed on the runway—but it exposes a human-factors trap that can bite any retractable-gear pilot, especially when you're trying to be quick and efficient right after touchdown. The discussion centers on the NTSB's final report for a Cirrus SF50 Vision Jet that landed at Watsonville Municipal Airport (Watsonville, California) on August 9, 2024. The pilot reported a normal approach and landing. Before touchdown, he had the flaps set to 100% and saw three green landing gear indications. Touchdown itself was uneventful. But during the landing roll—right about when braking began—the nose landing gear collapsed. Max and Rob walk through what the data showed. On short final, the airplane was properly configured: flaps at 100% and the landing gear down and locked. During rollout, both weight-on-wheels switches were briefly "unloaded," and the landing gear handle was raised and then lowered. That sequence unlocked the nose gear and allowed it to collapse. The main gear also unlocked, but it re-locked before collapsing. The probable cause boiled down to an inadvertent control selection: the pilot likely moved the gear handle instead of selecting the flap switch to 0%.
Publisher
Aviation News Talk – Pilot Stories, Safety Tips & General Aviation News
Link
aviationnewstalk.libsyn.com/411-vision-jet-sf50-landing-gear-collapse-wrong-lever-after-touchdown-ga-news
Published
January 24, 2026
Duration
53 min
Format
Podcast
Category
Entertainment · Leisure
Source
RSS feed
Host
Max Trescott | Aviation News Talk Network
Aviation News Talk – Pilot Stories, Safety Tips & General Aviation News
@aviationnewstalkpilotstories
#visionjetsf50 #lever #touchdown #aviation
