
More time to fly, less time to turn wrenches
In this episode, Mike, Paul, and Colleen discuss unnecessary maintenance, lean of peak, and flaming exhausts! Email podcasts@aopa.org for a chance to get on the show. Join the world's largest aviation community at aopa.org/join Full episode notes below: Mitchell has a Cessna 185 and he's wondering if it's smart to change out the rotocoils on his engine at some pre-determined point in order to avoid uneven heat patterns on his exhaust valves. Paul, despite having done this, advises him to borescope, and only change when he sees an uneven heat pattern. Since Mitchell already borescopes often, Paul thinks he'll catch a faulty rotocoil quickly. Mike suggests that Mitchell could hit the coil with a mallet and if it doesn't turn to change it. Regardless of the test or monitoring method Mitchell chooses, they agree it's unnecessary to change the springs pre-emptively. Doug has some questions about lean of peak. Specifically, he's wondering why his EGT spread is so large when his GAMI spread is only .2 gallons an hour. The hosts remind him that EGT only matters as a way to identify peak. Otherwise the relative and absolute numbers are meaningless. The big gap in EGT and CHT numbers often comes down to cooling inefficiencies, according to Mike. If the numbers indicated that the cylinders were making differential power, Doug would feel the engine roughness. So the hosts think he's doing just fine.
Publisher
Ask the A&Ps
Published
October 1, 2025
Duration
49 min
Format
Podcast
Category
Lifestyle · How To
Source
RSS feed
Host
AOPA
Ask the A&Ps
@asktheaps
#less #turnwrenches #howto
