
069 - Sealant Types, Backer Rod, and Joint Design for Buildings
Episode 69
Which sealant goes where on the building envelope? This episode covers every sealant type, backer rod, and how to design joints that actually work. We break down the five main sealant families: silicone, polyurethane, polysulfide, acrylic, and MS polymer. Each one has a personality, a best use, and a catch. You'll learn why silicone can't be painted, why polyurethane hates UV, why polysulfide smells like rotten eggs, and when MS polymer gives you the best of both worlds. Then we get into joint design, because even the best sealant fails if the joint is wrong. We cover backer rod (open cell vs. closed cell), the width-to-depth ratio that makes or breaks a sealant joint, tooling, and the number one joint design failure: three-sided adhesion. 📝 Key topics covered: Silicone sealant: acetoxy vs. neutral cure and when each one matters Polyurethane sealant for concrete expansion joints and window perimeters How backer rod controls depth and prevents three-sided adhesion The hourglass profile and why sealant joint geometry matters Adhesion failure vs. cohesion failure: two ways sealants break Sealant vs. caulk: what's the actual difference ⏱️ Chapters: (0:00) Why Sealants Matter Most (0:50) Free ARE Study Notes (1:22) Sealant vs.
Publisher
Architect Exam Podcast
Link
academy2.youngarchitect.com/sealant-types/
Published
June 1, 2026
Duration
26 min
Format
Podcast
Category
Lifestyle · Design
Source
RSS feed
Host
Michael Riscica
Architect Exam Podcast
@architectexampodcast
#sealanttypes #backerrod #jointdesign #design
